Winter Candle Holder Easy Dollar Tree Diy Sparkling

2 diy dollar tree candle holders that were pieced together to make 2 diy dollar tree lanterns.  They are made out of plaster and have glass cylinders with fairy lights inside.

Easily craft these DIY Dollar Tree Lanterns to create a High-End look for your Home Decor!

Bonus! I have FREE SVG Files for you if you want to decorate the glass cylinders for Fall or Christmas! See materials for files link below.

Sometimes you come across a DIY Dollar Tree Project that is so easy and versatile it's unbelievable! The day I spotted these candleholders (before I turned them into lanterns) I was actually looking for this year's Dollar Tree Elves.

Since I'm always on the lookout for easy DIY craft projects, I tend to quickly scan each aisle of the Dollar Tree when I'm there.

So while cruising down the aisle where candle holders are located, I stopped dead in my tracks when I spotted these candle holders.

2 candle holders with plaster base and glass cylinders.

I instantly knew the base could become a top and vice versa, creating an instant DIY Dollar Tree Lantern!

DIY DOLLAR TREE PLASTER LANTERNS

Personally, I fell in love with the color of gray/white since my mantle arch and candlestick holders are also gray/white. But you could easily paint these to match your home decor.

Regarding the tops and bases of these dollar tree candle holders, at first look they appear to be made from concrete. My inquisitive mind wanted to know since at first touch and then especially when I lightly sanded the top and bottom, I am pretty sure they are made of plaster instead.

Some may even want to call them cement or concrete. I would even venture to say it's made from Plaster of Paris.

Once I realized I wanted to make two Dollar Tree Lanterns, I'd need to buy 4 candlestick holders. This meant I would have 2 of the glass cylinder vases at the dollar tree left over.

So what do we crafty people do? We use the extra glass cylinder vases as DIY seasonal home decor!

dollar tree lanterns decorated with copper leaves on the glass cylinder vases
Fall Leaves
Green Holly and Red Berries decorate the dollar tree lanterns for the holidays.  It looks festive sitting next to Dollar tree Elves.
Holly & Berries

MATERIALS FOR DIY DOLLAR TREE LANTERNS

  • 4 dollar tree candle holders
  • Fairy lights with a small battery pack
  • X-tra Batteries to fit battery packs
  • Doublesided Super Strong Tape
  • Sanding Blocks
  • Felt (Optional)

MATERIALS TO DECORATE CYLINDER VASES AT THE DOLLAR TREE

  • A cutting machine ( I prefer this one)
  • Premium Textured Metallic Vinyl
  • Green Glitter Vinyl
  • Red Foil Vinyl
  • FREE SVG Files for Fall Leaves and Holly & Berries

VIDEO: HOW TO MAKE DIY DOLLAR TREE LANTERNS

DOLLAR TREE LANTERN INSTRUCTIONS

STEP 1 – Gather Supplies

Gather all supplies to make this project in one location to craft your diy dollar tree lanterns

If you want to make 2 dollar tree lanterns as I did, you will need 4 dollar tree candle holders.

Note: When I was at the Dollar Tree they were out of my favorite "Poster Tack". If you are unable to find this product, you can use a strong double-sided tape instead to attach the fairy lights battery pack to the inside of the lid of the lantern.

Poster Tack Product available at the Dollar Tree to help hang posters and Art work.  You can use this to attach the fairy lights battery pack to the diy dollar tree lanterns

STEP 2 – Lightly Sand Top and Bottom of all the Plaster Pieces

I used a sanding block but you could also use sandpaper such as a 400 Grit. It does not take hardly any sanding or pressure to make the tops, bottoms, and edges of the plaster candle holders. Some can even skip this step but mine was pretty rough and I wanted to protect my furniture and provide a smooth appearance.

lightly sand the top and bottom of the plaster candle holders.

STEP 3 – (Optional) Paint the Top and/or the Bottom of each Plaster Candle Holder

I preferred to paint just the tops of mine to make them look High-End instead of distressed after sanding.

paint the top and bottom of the plaster candle holders with acrylic paint.

STEP 4 – Attach Fairy Lights Battery Pack to Inside of Top Lantern Piece

Whether you use "Poster Tack" or "Double-sided Tape" make sure it's strong. The double-sided tape they sell at Dollar Tree is not strong enough for this project. So if you can't find the Poster Tack or a different brand of Poster Tack I would definitely get some strong double-sided tape. This is my all-time favorite strong tape. It can hold surge protectors up on a wall and not fall off. Plus, if you need to remove it, it will not leave any residue or damage. This tape is ah-Mazing!

Pull the battery tab from the battery pack of the fairy lights as seen below.

pull the battery protector tape from the fairy lights to activate the fairy lights battery.

Cut a piece of tape or use some Poster Tack to place on the back of the battery pack. (the side with the little screws) This way, once you place the battery pack inside the lid, you will be able to open the battery pack to replace batteries when needed.

cut a piece of double-sided tape or use poster tack to place on the battery pack.

Next, remove the clear cover piece of tape to expose the sticky side and press firmly onto the inside of the lantern lid.

placing double-sided tape to the bottom side of the battery pack

Then firmly push the battery pack into the inside of the lantern top piece as seen below.

pressing battery pack into inside of lantern lid.

Now we want to fold the part of the wire that has a plastic coating on it to fit alongside the battery pack. We don't want that coated wire to hang below the glass to be viewed. So we secure it with tape just like the battery pack.

pushing coated wire and double-sided tape firmly into place inside the top of the dollar tree lantern

STEP 5 – Adding Fairy Light Wire to Base and Cylinder Vase Piece

First, place the cylinder vase part on top of the candle holder base.

The fairy lights come coiled up in a circle shape. I found they look best in the end, if you first straighten them out, then put the tip of the end of the wire straight down into the glass cylinder and just start randomly pushing the rest of the fairy lights into the glass vase.

It sounds hap-hazard but the end result will look much more natural and pretty!

pull fairy lights out to make them straight instead of coiled in a circle
adding the fairy light wire into the glass cylinder vase.
once all wire is inside of the glass part, place the lid on top.

Now, when you want the fairy lights turned on, simply pull up the lid and move the on/off switch to the on position. If it is too tight of a fit, I use the tip of something, like a pair of scissors or hairpin, toothpick ETC.

Taking lid off to turn on fairy lights when needed.

I just love how easy these DIY Dollar Tree Lanterns are to make and the end result is stunning. Plus, the fact you have 2 extra glass cylinders to decorate for any holiday or occasion.

If you want to decorate yours with my FREE SVG files be sure to download them from my FREE Resource Library.

If you do not have a cutting machine, I'm sure you can find some cute stickers or some other way to decorate the glass part.

I'd love to see what you created.

If you need assistance with how I added the vinyl to the glass vase part, be sure to watch the video linked above where I show the entire process.

A Fall Fireplace mantle decorated with the diy dollar tree lanterns.

A FEW MORE DIY CRAFT PROJECTS WITH FREE FILES ARE SHOWN ON MY MANTLE, ENJOY!!!

  • Ceramic Subway Titles
  • Pumpkin Mandala 3-D Layered Project
  • Autumn Banner & Fall Sticker Offsets
diy dollar tree lantern decorated for Fall with copper textured vinyl leaves.
diy dollar tree lantern decorated for the Holidays with Holly & Berries

Please always feel free to ask any questions or even leave a helpful tip I may have forgotten or did not think to include in this post! You can leave a comment or question below or on my YouTube channel.

Let's all help each other and "create with love".

♥♥♥ If you found this post or video helpful or want to save it for later, please pin or share the love ♥♥♥

I appreciate your sharing and support ♥

♥ Create with Love ♥

sullivanseessishe.blogspot.com

Source: https://createswithlove.com/diy-dollar-tree-lanterns/

0 Response to "Winter Candle Holder Easy Dollar Tree Diy Sparkling"

Publicar un comentario

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel